KitPlus | Articles

Watch out for dead pixels

A dead pixel in a camera imaging sensor can manifest itself in a number of ways. Implying black, 'dead' is not necessarily the correct term for a pixel failure. This is because imager defects include hot pixels, sparkles, noisy or lazy pixels. These problems usually arise during the chip manufacturing process. Defective pixels can appear as unusual...

Submitted by Bob Pank#

Published 01 September 2012

ARRI LED technology

With a growing range of LED products, ARRI is providing industry professionals with all of the benefits of using a Low Energy Lighting source with familiar characteristics. The L-Series LED Fresnel fixtures are so close to their conventional equivalents that they create a like-for-like replacement of traditional Fresnels with LED-based light engine...

Submitted by Bob Pank#

Published 01 March 2012

Is it time to hang up your glasses for field 3D monitorin...

The rapid growth of 3D content being shot and produced has created many challenges to the camera operators, production teams and indeed manufacturing companies. There has always been the problem of viewing 3D material as it is being shot and the ability to review it immediately afterwards, whether as a camera viewfinder or a portable 3D monitor. At...

Submitted by Bob Pank#

Published 01 January 2012

3D Five years on

For me, IBC2006 was the beginning of the modern 3D era. At an invitation-only presentation, 3ality’s CEO Steve Schklair described what his company was achieving with S3D. Suddenly it all made sense. With the accuracy of digital shoots and computer technology replacing difficulties and expense of working with film, 3D could now be viable. Unlike the...

Submitted by Bob Pank#

Published 01 December 2011

Multi Function 2D and 3D Signal Monitoring Capability

We find ourselves in a constantly evolving industry with an ever increasing variety of video sources and devices that require monitoring. There is still a significant amount of analogue equipment requiring both composite and component monitoring, and then there is the whole raft of digital video equipment supporting SDI, HDSDI, 3G and now HDMI conn...

Submitted by Bob Pank#

Published 01 December 2011

Real practicality in test and measurement

We are quite an unusual company, a unique hybrid. On one hand Flotsam Films is an independent producer but we also provide full production capabilities and consultancy for other filmmakers. The other part of our business is our own post production facility in London, used by our in-house productions and by other external clients, particularly indep...

Submitted by Bob Pank#

Published 01 July 2011

Eye to Eye: Video Post-production

My first direct experience of video post-production involved hauling a heavy Sony U-Matic tape machine up a flight of stairs before going back for an equally heavy playback deck, a bulky CRT monitor and a large box of interface giblets. That was in 1978. 33 years on, an Apple Mac does the whole editing job a great deal better, faster and more econo...

Submitted by Bob Pank#

Published 01 May 2011

True Colours Shine Through With CCS

When you are a broadcast engineer working in front of a stack of LCD monitors, seeing a significant difference between the brightness and colour of each monitor can be both annoying and tiring on the eyes. Worse still, if you in a Master Control Room and the pictures have taken on a sickly green hue, how do you know that it is just the monitors at...

Submitted by Bob Pank#

Published 01 March 2011

Truth Lies and LEDs

As an emergent technology within film and broadcast over the last six years, LEDs have generated strong opinions for and against, adjudging their capabilities and relative merits, when compared to traditional light sources. Development has seen them grow from the small coloured pinpoints of light on your stereo or TV, to a level where they can prod...

Submitted by Bob Pank#

Published 01 January 2011

LightLighting Sky News at the Gherkin

Jeff Randall Live is a new flagship daily business update on the Sky News channel, broadcast from Sky’s Gherkin studio in London. A recent addition to the City skyline, the Gherkin is located at 30 St Mary Axe. Its modern design includes a secondary exterior skin which gives the building its characteristic shape and is said to reduce its energy req...

Submitted by Bob Pank#

Published 01 August 2010

The Real Cost of Calibration

Calibration is the cornerstone of measurement confidence. Badly calibrated instruments are liable to produce measurement errors which can then propagate throughout an enterprise and even to the end-user’s product… and beyond! This can have a detrimental effect on a company’s reputation and profits, and could even have legal implications. The best w...

Submitted by Bob Pank#

Published 01 April 2010

New Light in the Forbidden City

IBC 2009’s Production Village was the venue for the launch of a revolutionary new lighting product, the Rotolight ‘Stealth Edition’ RL48 ring-light. Although the show had more than 48,000 visitors and over 1200 exhibitors, Rotolight was listed in the TV-Bay lighting category, featured in the IBC News and the ‘Eye Catcher’ technology report on Amste...

Submitted by Dennis Lennie

Published 01 December 2009

Monitor Colour Calibration

With the growing acceptance of LCD displays for high end picture monitoring it has become increasingly important that users can be assured that they are working to a known standard. The Xrite Eye-one is typical of the more simple probes available, and is similar to the probes used to calibrate computer monitors for reliable photographic processing....

Submitted by Dennis Lennie

Published 01 November 2008

Virtual sets come of age

Virtual studios (VS) have experienced a roller coaster ride of popularity through their short life. Initially they were hailed as the future for live broadcasting, seamlessly combining people and computer-generated environments without the need for post-production. But the racks of SGI computers, complex studio set-ups, complex camera tracking syst...

Submitted by Dennis Lennie

Published 01 November 2008

Getting the best out of your LCD

Getting the best out of your LCDs?Many people who use CRT picture monitors have found the introduction of LCD displays disappointing. Getting the best out of your LCD may not be as simple as it may seem. With a wide choice of vendors and models all proclaiming broadcast quality, it can be difficult to determine which product is most suitable for yo...

Submitted by Dennis Lennie

Published 01 November 2008