Matrox Video Demos at InfoComm 2024 Will Showcase New AVoIP Products and Technology for Mission-Critical Environments

Published: 15 May 2024

Matrox Video Demos at InfoComm 2024 Will Showcase New AVoIP Products and Technology for Mission-Critical Environments

Technology innovator Matrox® Video today announced that the company will highlight its leading AV-over-IP (AVoIP) technologies — including the brand-new, next-gen Vion AVoIP gateway and Mura distributed video wall appliance — at InfoComm 2024, June 12-14, at the Las Vegas Convention Center. Exhibiting in Booth W1132, Matrox Video will demonstrate a comprehensive array of products for networked IP-based control rooms and other mission-critical environments, as well as for live events, and show how they enable users to control KVM over IP, stream over IP, power video walls over IP, and respond to critical events in real time.

“Driving next-gen AVoIP technology, including IPMX, Matrox Video manufactures the products essential to IP-based applications in mission-critical environments,” said Spiro Plagakis, vice president of product management at Matrox Video. “We’re excited to announce new products and showcase their critical capabilities in demonstrations at InfoComm 2024. Our new Mura distributed video wall appliance and Vion IP video gateway, with our range of video encoders and decoders, converters, IP KVM extension and switching solutions, and video wall products enable seamless collaboration over IP, enhancing operator efficiency and informing responsive decision making.”

NEW TECHNOLOGY DEMO: Mura Distributed Video Wall Appliance
The highly scalable, fully IP Mura distributed video wall appliance uses a serverless architecture and powerful web configuration tool for easy setup and operation and delivers PTP-synchronized and framelocked video to as many as 64 4K displays for the most demanding applications. Supporting H.264 and H.265 over 1- to 2.5-GB networks, and controllable with the proven Matrox NetAPI, each Mura processor can decode up to four 4Kp60 streams in 4:4:4. With the new Matrox Mura distributed video wall appliance, system integrators can effortlessly deploy high-density, cost-effective, fully IP-based distributed video walls by reducing the need for extra hardware and cabling. The Mura DVW demo at InfoComm 2024 will feature a 5x3 video wall, powered by five Mura appliances. A total of 15 4K displays will be framelocked and perfectly synchronized, with the Mura appliances streaming content from a variety of sources including Matrox Maevex 7100 and Maevex 6100 systems, as well as the new Matrox Vion IP-to-IP gateway. Video wall creators gain easy control with the Matrox NetAPI and Matrox MuraControl™ for Windows® software.

NEW TECHNOLOGY DEMO: Vion AVoIP Gateway
Built on next-generation, IT-inspired architecture, Matrox Vion solves the problem of moving from one IP video format to another and is the first Matrox Video product to support NDI. The Vion technology showcase in the Matrox Video booth will demonstrate how this new multi-purpose AVoIP gateway enables flexible, easy IP video bridging and conversion, boosting productivity and enabling new local and cloud IP-to-IP workflows. As an IP-to-IP video gateway, Vion is ideal for live production and collaboration, with support for 4:4:4 color and optional SDI/HDMI I/O. Vion converts to and from formats and codecs like RTSP-H.264 to NDI, NDI to IPMX, IPMX to SRT-H.265, and more, including transmitting NDI over SRT for internet-based transmission. Perfect for the most demanding AV applications, Vion preserves the fine details of desktop content with HEVC 4:4:4 codec support. With flexible, low-latency multichannel encoding, decoding, transcoding, and processing, Vion enables color space conversions, changes to streaming protocols and bitrates, and transmits multiple concurrent streams.

DEMO: Multimonitor IP KVM Extension and Switching With Matrox Extio 3 and KMLync
Matrox Extio™ 3 IP KVM extenders and the KMLync USB keyboard/mouse switch enhance operator efficiency by enabling remote monitoring and control of systems across a multimonitor workspace with up to four 4K or 16 full-HD displays. At InfoComm 2024, Matrox Video will demonstrate its KVM matrix system over IP for multimonitor operator workspaces over 1-GbE networks, with fast switching. Using 4K multiview over IP, the demo also will show how users can visualize four video sources on a single 4K monitor and control them with one keyboard and mouse, realizing greater efficiency with seamless mouse switching.

DEMO: Ultra-Low Latency Streaming and Recording With Matrox Maevex Encoders/Decoders
Pro-AV users interested in streaming and recording H.264/H.265 content with ultra-low latency can see Matrox Maevex 6100 Series and the new Maevex 7100 Series encoders and decoders in action. Enabling single and multichannel, ultra-low latency, low bitrate, high-quality, simultaneous streaming and recording, and zero-latency pass-through for real-time output of AV content in collaboration-focused environments, these Matrox products empower operators to distribute critical content to any location, in turn facilitating more informed and accurate real-time decision making. Users can pair Maevex 6100 Series encoders and decoders to achieve full-frame synchronization from multiple sources. The Maevex-captured streams can be displayed on a Matrox LUMA Pro-powered video wall.

DEMO: IP-Based Video Walls With Matrox LUMA Pro Graphics Cards
Video wall creators will see how Matrox LUMA Pro graphics cards produce versatile baseband and IP-based video walls with robust H.264/H.265 decoding. LUMA Pro supports up to two 8Kp60, two 5Kp120, or four 5Kp60 DisplayPort™ 2.1 monitors, and users can combine cards for a high-density-output video wall of up to 16 synchronized 5Kp60 displays. Framelocking up to four LUMA Pro cards facilitates easy addition and synchronization of displays. Leveraging Intel® Arc™ GPU advanced media codec engines and supported by Matrox Mura software libraries, these cards enable the decoding and display of over 40 full-HD streams per card. Also on display will be the new Mura C4K quad HDMI® capture PCI Express® card engineered for video-wall use cases that require high-density HDMI captures up to 4Kp60.

DEMO: Video Production, Routing, and Distribution With Matrox ConvertIP Encoders/Decoders and Converters, and ConductIP Signal Routing
The Matrox ConvertIP Series of IPMX/ST 2110-ready encoders/decoders and converters enable interoperable, cost-efficient, and scalable IP video production, monitoring, and routing. The ConvertIP demo at InfoComm 2024 will highlight the new Daisy Chain feature for flexible and redundant conversion and monitoring and low cost of ownership. In live production applications, Daisy Chain facilitates efficient, cost-effective distribution of multiple streams of content throughout the physical environment. As a result, facilities get more out of any active network port, use less network equipment, and ease installation of network wiring runs. Complementing ConvertIP, Matrox ConductIP signal routing software makes it possible to discover, monitor, and route any AMWA NMOS-enabled SMPTE ST 2110 or IPMX device or signal.

NEW Lineup of Matrox DSX ST 2110 and IPMX Network Interface Controllers
Developers visiting the Matrox Video booth will discover the Matrox DSX LE5 D25 LP and DSX LE6 D100 network interface controller (NIC) cards, new additions to the company’s lineup of SMPTE ST 2110 cards that power flexible, cost-effective products enabling the broadcast and pro-AV industries’ shift to IP workflows. Offering multichannel video inputs and outputs (I/O) over 10/25/100GbE networks, along with the media processing-rich Matrox DSX SDK, these new NIC cards allow equipment manufacturers to design any type of IP-based application from low-density HD/3G/4K and 8K workflows at the right price point within one SDK. IPMX will also be supported with these IP cards to provide RGB 4:4:4, custom resolutions, and custom frame rates, all requirements for media server applications that drive large LED content for entertainment centers and virtual production applications. Developers are requested to book an appointment to review the Matrox Video ST 2110 and IPMX roadmap.

Extended AVoIP Product Highlights
In addition to focusing on products designed for networked, IP-based control rooms and mission-critical environments, Matrox Video will present products, such as the company’s popular Monarch EDGE remote production and contribution encoders and decoders and its NIC cards for ST 2110/IPMX, suited for both pro-AV and broadcast applications. Experts on the booth will be available by appointment to provide a closer look at the Matrox Video ST 2110 and IPMX roadmap, and to discuss other 2024 IPMX initiatives under way, including Matrox IPMX Smart Display Modules (SDM) for projectors and commercial displays; IPMX/ST 2110 IP-to-IP gateways to handle media/protocol/timing conversions including uncompressed/JPEG-XS and more; and Software IPMX products. Matrox Video products will also be included in a demo featuring interoperability with other IPMX products, as well as AES67 devices, at the AIMS (Alliance for IP Media Solutions) Booth C6123.

More information about Matrox Video and its products is available at video.matrox.com.

 

Related News

Related Videos

© KitPlus (tv-bay limited). All trademarks recognised. Reproduction of this content is strictly prohibited without written consent.