Introducing Steadimate-RS for Ronin RS2, RS3 RS3 Pro Converts the Handheld motorized gimbal to body-worn Steadicam and reg;

Published: 22 September 2022

Introducing Steadimate-RS and trade; for Ronin RS2, RS3 and amp; RS3 Pro Converts the Handheld motorized gimbal to body-worn Steadicam and reg;

The new Steadimate-RS™ is the 3rd generation of the Steadimate lineup, designed to improve the functionality and user experience of operating Ronin RS2, RS3 and RS3 Pro motorized gimbal stabilizers. Designed in Burbank, CA by the same engineering team behind the Steadicam® M-Series stabilizers and Volt technology, this new system enhances the capabilities of DJI's handheld motorized gimbal by refining the camera stabilization and improving operator comfort to offer a uniquely fluid movement that is reminiscent of a traditional Steadicam sled.

Steadimate-RS converts the handheld motorized gimbal into a full body-worn stabilizer by attaching a new mechanical gimbal and pan bearing to the 1/4"-20 mounting holes of the Ronin Series Accessory NATO Ports, along with a weighted gimbal post extension with fine tune balance adjustment. The system is completed with the choice of a spring arm and vest combination, available in either 15-lb./6.8 kgor 30-lb./13.6 kgload capacity.

The mechanical gimbal yoke features a new ball-bearing design to deliver full pan capability while providing assisted X and Y-axis stabilization. Addition of the Steadicam arm and vest reduces vertical bounce often seen in walking shots, by providing stabilization of the Z-axis while reducing operator fatigue and enabling longer shot duration by transferring the payload across the torso and hips. Together, this 3-axis manual stabilization and weight redistribution greatly expands the capability of the Ronin to greatly improve the fluidity of camera movement. The system also enhances the vertical range of motion by offering Low Mode capability. Operators can quickly and easily invert the motorized gimbal for a low angle perspective without any hardware reconfiguration. This allows the camera to transition from ground to eye-level and back again seamlessly.

The Steadimate-RS gimbal collar/yoke and weighted base (SDMRS-GIM) is available separately to use with an operator's existing 1/2" post Steadicam for $395. Kits are also available complete with an Arm and Vest. For weight loads up to 15-lb./6.8 kg there's the SDMRS-A15VK which pairs Steadimate-RS with the A15 Arm and Aero Vest ($1395 MSRP). For30-lb./13.6 kg capacity, the SDMRS-A30VK includes an A30 Arm and Zephyr Vest ($2995 MSRP).

For more information on Steadimate-RS visit https://tiffen.com/pages/steadimate-rs-edu

Related News

Related Articles

Related Videos

© KitPlus (tv-bay limited). All trademarks recognised. Reproduction of this content is strictly prohibited without written consent.