To view this page ensure that Adobe Flash Player version 11.1.0 or greater is installed.
NEWS MANAGE & MONITOR PHABRIX UNVEILS ITS LATEST UHDTV TECHNOLOGY FOR T&M AT BVE LONDON PHABRIX will be demonstrating the V1 release of its latest technology for test and measurement - the PHABRIX Qx on stand L01 at BVE Excel London in February. Designed with a host of specialist instruments for high level testing of UHDTV standards, the Qx will in addition be showing waveforms and vector scope as it looks to provide post production and broadcast industry support for its latest product development. Phil Adams managing director PHABRIX commented; ‘We have a very loyal customer base globally for our SD to 3G SDI products in the Sx and the Rx product ranges. One of our most important customer sectors is in broadcast manufacturing where our instruments are synonymous with accurate, cost effective test and measurement. With the introduction of the Qx at NAB last year, we have broadened that appeal with our ability to simultaneously generate and analyse standards beyond HD and 3G to incorporate 6G and 12G – all standard on the Qx. Add to this our unique RTE – ‘Real Time Eye analysis’ (physical layer analysis) and you have a formidable instrument.’ From a technical point of view the Qx technology has some notable USP’s. One of the most important is its support for 4 x 12Gbps inputs and 4 x 12Gbps outputs via SDI or from the integrated dual optical SFP cages. The Qx also provides simultaneous closed loop testing of critical UHDTV equipment whatever the ‘ﬂavour’ of UHDTV. Due to the differing composition of UHDTV standards be it 4 x 3G, 2 x 6G or single 12Gbps, the Qx determines the signal type based on the signal parameters it recognises – this information is used to augment and verify SMPTE 352 packet content allowing the Qx to operate even when incorrect 352 packets are present. With a sophisticated range of toolsets the Qx is able to take a lot of the complexity out of understanding the plethora of new formats. A useful data view instrument is included allowing the data to be observed in hex, decimal or binary formats. Timing is a critical issue when using multiple link SDI standards (4 x 3G, 2 x 6G) and here the Qx provides a dedicated tool to check SDI signal alignment. Having a real-time physical layer instrument with automated SMPTE measurements, histograms, jitter and alignment timing can 20 | KITPLUS - THE TV-BAY MAGAZINE: ISSUE 121 January 2017 conﬁrm signal integrity and with the additional 5 decade ﬁltered jitter instrument for noise analysis, the Qx provides a sophisticated single tool solution. 32 channel meter support for audio is also provided as standard and the company has announced it will continue to develop audio support to be revealed at NAB later in the year. Dealing with complex presentation of data and understanding format composition as a combined analyser and generator and displaying it clearly to an engineer is a corner stone of PHABRIX’s success. One of the most impressive features of the Qx is the delivery of this information through a highly advanced user interface. Instruments are presented using icon selection rather than text allowing the product to appeal to different language speakers. Instrumentation and audio is provided simultaneously on both HDMI and SDI monitor outputs and the instrument output is further conﬁgurable for reference timing, TCP/IP Ethernet control and powerful pre-set conﬁguration. The PHABRIX Qx is also designed as a hybrid solution for the new IP infrastructures. At BVE this year the company will be demonstrating support for SMPTE ST 2022-6. PHABRIX will also be presenting its highly successful PHABRIX Sx hand held series of products including the PHABRIX SxE with its eye and jitter toolset. Each of the Sx series provide a combined generator, analyser and monitoring instruments and with over 5000 in service it is easy to understand the appeal of this versatile product. Recently the company added a new multi interface portable called the TAG which provides support for SDI, optical and HDMI EDID view– certainly one to check out. The PHABRIX Rx range of rasterizers continue to provide support for test and measurement in a range of applications from manufacturing to OB and broadcast engineering. Able to support up to 4 inputs simultaneously with both video and audio toolsets as standard, the Rx can display up to 16 instruments via HDMI or SDI output. PHABRIX can be found near the main entrance doors at BVE stand LO1. Martin Mulligan PHABRIX sales director and Nicola Milburn regional sales manager for UK and Europe will be in attendance.